Design Requirements
       Acceptable design programs : Adobe Illustrator. Adobe Photoshop, PDF, Adobe Indesign, High resolution image file (over 150 dpi).

      1. Color mode : Set CMYK mode in document information (Adobe Illustrator / Photoshop)

2. Apply "Create outline: to font/text/wording * in Adobe Illustrator : Type > Create outlines

printing requirement 1

  printing requirement 2

       3. Apply "Rasterize" to image, logo and blended objects
 * in Adobe Illustrator : Object > Rasterize (Set CMYK mode and resolution 300 dpi)
         * Blended objects with gradation, shadow and feather should be grouped with the

         4. Set up bleeds (margins to be trimmed off after printing)

 * 1mm each for all sides : top, bottom, left and right (width 2mm, height 2mm)
           * For example, if a size of printed card or page would be A4 (210 x 297mm)size,

            background design and then "Rasterize" applied together. If there is no background,
            apply "Rasterize" to object only.
         * Objects with "Opacity" should also be applied "Rasterize" with background.
              the artwork size should be 212mm x 299mm. The margin is filled with background
              design or color.

  printing requirement 3   custom stationery printing guide 1

for custom stationery design

      1. Photoshop : set a document to a resolution 150dpi or higher and apply "CMYK" mode.
      2. Group : Unless group the objects and texts, printing errors can occur.
      3. Masked objects : Remove hidden mask area outside of printing line

       * Minimum visible size of font (4pt), Minimum visible size of line (0.25pt)
      6. Design file size : If the design file size is more than 5M, as email can cause an error,     
          save it in personal "Dropbox" and give us the link information of the Dropbox page.

      4. Opacity : less than 10% may not be visible in color.
      5. Visible size
       * recommended font size for custom stationery printing (8~12point)
      7. Not to overprint. (If overprinting is accidentally checked, the color of the text or object
          may be hidden in the background.)
: Window > Attributes > Don't check "Overprint Fill: and "Overprint Stroke

printing requirement 4

  printing requirement 5

        Printing layout
for custom stationery

      1. Place the front design on the left and the reverse design on the right.
      2. In case of vertical design or portrait type, place the design by turning it 90 degrees

    Color check and assurance :

    1. Depending on conditions of personal monitor, the color of design file may look different.
    2. Please understand that colors may vary a bit according to paper material and lamination.

          counterclockwise. (Please see the sample image below)
      3. Be sure to group all objects
      4. Make a design file with actual printing size (do not apply it smaller or larger.)
    3. If customer needs to specify correct color, set the "Pantone" color code. "Pantone color"         applies equally worldwide. The pantone color code can be found on the below page.
      * https://www.pantone.com/color-finder  (link)

Layout for custom stationery printing

Finishing Order Layout Guide
for hot stamping, spot-UV, embossing

       Finishing for standard name cards : foil (hot) stamping, blind embossing, raised ink,
       perforation, die-cut, rounded corners, scoring, spot UV, running numbers. lamination.

printing layout 2

      1. First position (left side) : Complete design including printing and finishing area.
      2. Second position (center) : Printing design only exclusive of finishing area.
      3. Third position (right side) : finishing design only exclusive of printing area.

      *  Regardless of finishing color, finish shape should be collectively set in K100 of CMYK.
      *  Following finishing is unavailable both sides due to the marks appearing on back side.
   :      Foil stamping, Blind embossing, Thermography (raised ink)
      *  Over 350gsm paper is impossible to apply scoring and perforation.


Name Cards Sticker / Labels Invitation Cards Stationery printing Large format printing Sticky Notes printing Custom bag printing
Standard name cards
Premium name cards
Thick name cards
Spot UV name cards
Plastic name cards
Custom sticker
Label printing
Die-cut sticker
Transparent sticker
Removal sticker
Metal sticker
Large format sticker
Invitation card printing
Ready-made invitation
Wedding cards
Greeting cards
Custom printing
Plastic printing
Wall decal sticker
Custom wallpaper
Wall murals
Poster printing
Die cut large format
Custom sticky notes
Die-cut sticky note pads
Hardcover sticky notes
Paper bags
Custom Paper bag printing
Kraft paper bag
Non woven bag
Canvas bag
Plastic bag

Copyright © Kocoprint Singapore2015-2019 All rights reserved  |  email : support@kocoprint.com